’01-’04 Tacoma ULTIMATE Lift Hood Strut Kit

$96.95

Rated 4.91 out of 5 based on 35 customer ratings
(35 customer reviews)
  • Our new ULTIMATE Lift High Lift Hood Strut Kit for late 1st Gen (’01-’04) Tacomas eliminates the prop rod and makes your engine compartment free and clear of obstacles.
  • One-handed hood opening and closing – the struts lift the hood smoothly to its fully open position, and allow it to close and latch securely without slamming.
  • High-Lift capability allows you to increase the open hood height by up to 8 inches above the stock prop rod height, for better lighting and access to all your engine projects. Choose the desired height during installation, and the hood will open to that position every time.
  • Complete kit with premium OEM-quality components includes two enameled gloss black high-lift hood struts, heavy gauge gloss black powder coated brackets, all required installation hardware, and illustrated step-by-step installation instructions.  Even a drill bit stopper is included to make drilling safer.
  • Easy installation in under 30 minutes.
  • 5 year warranty.
  • 100% Made in USA.
  • Designed and tested to work with all stock late 1st Gen (’01-’04) Tacomas.
  • Contact us if you have non-stock additions or alterations under the hood along the inner fenders. We’ve worked with customers to accommodate many unusual situations.

35 reviews for ’01-’04 Tacoma ULTIMATE Lift Hood Strut Kit

Powered byCusRev
4.9
Based on 35 reviews
5 star
91
91%
4 star
8
8%
3 star
0%
2 star
0%
1 star
0%
Showing 3 of 35 reviews (4 star). See all 35 reviews
  1. Rated 4 out of 5

    Patrick Pettit

    Pretty Easy to install

  2. Rated 4 out of 5

    Terrance L.

    There great easy to install and work well. Would recommend them.

  3. Rated 4 out of 5

    Victoria Burton

    Great product! Installs and works as promised on a first gen 2002 Tacoma with Ditch Lights. I gained 4.5″ of additional height above the pole height. Ditch lights measure 3.5″H x 3.5″W x 3.25″D. Install hint: Drill first hole on fender bracket and rivet it in place. Then drill the next hole and river it and so on. Otherwise the holes are likely not going to fit properly. Once in place, brackets are very strong! I can’t stop opening the hood to marvel how cool it is!!! Absolutely fantastic!!!.

Add a review

Your email address will not be published. Required fields are marked *